Geli Pillow vs. Mediflow Original Fiber

Mediflow Original Fiber has a fiber cushion over a water base. The Geli Pillow has a separate water insert and two removable pouches, one with fiber and one with shredded foam. You can lower the Geli Pillow by removing fill while keeping the same amount of water.

Close-up of the Geli Pillow’s chevron-knit cover lifted above its blue water insert and two white cushioning pouches.

How the pillows compare

Both use water for support. The difference is what sits between the water and your head.

Geli Pillow cutaway showing the blue water insert above two soft pouches, one opened to reveal pieces of foam mixed with fiber.
Mediflow cutaway with white fiber fill above the blue water base inside the cotton shell.
Feature Geli Pillow Mediflow Original Fiber
Construction Three removable inserts hold water and beads, fiber, and shredded foam. A combed-fiber cushion over a water base.
Height adjustment Remove some soft fill or a whole pouch to lower the pillow while keeping the same water level. Add or drain water to change the height and firmness.
Cushioning Choose fiber or shredded memory foam by moving that pouch to the top. Combed fiber cushions your head above the water base.
Cover Cooling knit on one side, breathable mesh on the other. 100% cotton.
Washing Remove the inserts. Wash the outer cover according to its care label. Drain the water, hand-wash in warm water, then air-dry the fill completely.
Home trial 100 nights from delivery. Request a return on days 31–100. You pay return shipping. 30 days from purchase in the US. You pay return shipping.
Product sources and return policies

Compare the Geli Pillow and Mediflow Original Fiber. For care and returns, see Mediflow’s washing instructions, Geli’s trial terms and Mediflow’s US return policy.

Why pillow height matters

A 2021 review of pillow designs cited in Geli’s research library found that pillow height and shape may affect how the neck lines up when you lie down.

In the separate experiment shown here, ten healthy adults tried four heights while lying on their backs. Average neck pressure was lowest at 11 cm and highest at 15 cm. The study did not identify an ideal height for a whole night’s sleep.

Neck pressure at four pillow heights
Pillow heightAverage pressure (kPa)
11 cm
4.00
13 cm
5.39
15 cm
6.60
17 cm
6.41

Each reading averages pressure across the neck contact area on the study pillow. An individual spot can carry more pressure. Ren et al., 2016, Table 4

Why Geli uses water and beads

Dr. Tara Youngblood, inventor of Geli’s bead technology, describes how the insert is designed to follow the contours of your head and neck. She also explains the role of water in absorbing heat as it warms. The thermal measurements on Geli’s science page are for a mattress layer.

On the pillow, the water stays in its own insert. If the support feels right but your head sits too high, you can take out the foam pouch and try the lower setup with the same water fill.

What did Mediflow’s clinical trial find?

Lavin, Pappagallo & Kuhlemeier, 1997
Archives of Physical Medicine and Rehabilitation
Mediflow supplied funding and materials.

A Johns Hopkins crossover study enrolled 41 people with neck pain. On average, participants reported less pain on waking and better sleep quality with the water-based pillow than with their usual pillow or a neck roll.

How the five-week trial worked

Participants spent one week on their usual pillow. Each then tried the water pillow and the neck roll for two weeks apiece, in random order. The Geli Pillow was outside the scope of the trial.

Two ways to adjust the Geli Pillow

Illustration of the unzipped Geli Pillow cover showing its white chevron knit and open mesh

Change the loft

Open a soft pouch and take out a little fiber or foam. Keep the fill so you can add it back. You can also change the order of the inserts.

Fine-tune the firmness

Remove the blue insert before adding water. Watch the fill port and funnel in use, then follow the fill guide supplied with your pillow.

A side sleeper resting on the white chevron-knit face of the Geli Pillow

Pillow questions, answered

Do both pillows use water?

Yes. Geli holds water and beads in a removable sealed insert. Mediflow holds water in a base beneath its fiber cushion.

How can I make the Geli Pillow lower?

Remove a small amount of fiber or foam from a zippered pouch, or leave one soft insert out. Save any removed fill and try the pillow in your usual sleep position before adjusting again.

Which pillow gives me more ways to change the feel?

Geli lets you change the water level, the soft fill and the order of the three inserts. Mediflow Original Fiber suits someone who wants a fiber cushion and prefers to make adjustments by changing the water level.

Who pays return shipping on a Geli Pillow?

The customer pays return shipping. Contact Geli for authorization and the applicable return cost during the trial return window, days 31 through 100 after delivery.

Shop the Geli Pillow